my kurobox

Linux kurobox 2.4.17_mvl21 #24 2004年 10月 19日 火曜日 17:17:03 JST ppc GNU/Linux

mike@kurobox:>dmesg
Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.17_mvl21 (root@toda_dev.melcoinc.co.jp) (gcc version 2.95.3 20010315 (release/MontaVista)) #24 2004年 10月 19日 火曜日 17:17:03 JST
KURO-BOX (C) 2004 KUROUTO-SHIKOU.
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1
OpenPIC Version 1.2 (1 CPUs and 139 IRQ sources) at 80040000
decrementer frequency = 32.493625 MHz
Calibrating delay loop... 172.85 BogoMIPS
Memory: 124760k available (1244k kernel code, 556k data, 188k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
MELCO INC. RTC driver ver 1.00
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x80004600 (irq = 138) is a 16550A
ttyS01 at 0x80004500 (irq = 137) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 10000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD680: IDE controller on PCI bus 00 dev 60
CMD680: chipset revision 2
CMD680: 100% native mode on irq 17
ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD2500JB-00REA0, ATA DISK drive
ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
FLASHDISK:Initialized [FUJITSU MBM29PL32TM]
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169s/8110s Gigabit Ethernet driver supports Jambo Frame 1.8n4b <2004-3-16> at 0xc9000f00, 00:0d:0b:69:6f:d6, IRQ 16
eth0: Auto-negotiation Enabled.
eth0: 100Mbps Full-duplex operation.
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
hcd.c: ehci-hcd @ 00:0e.2, PCI device 1033:00e0 (NEC Corporation)
hcd.c: irq 19, pci mem c9002f00
usb.c: new USB bus registered, assigned bus number 1
hcd/ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 5 ports detected
usb-ohci.c: USB OHCI at membase 0xc9004000, IRQ 19
usb-ohci.c: usb-00:0e.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xc9006000, IRQ 19
usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 2137k freed
fff70000:4f4b4f4b
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
fff70000:4f4b4f4b
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 188k init
Adding Swap: 530136k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Trying to free nonexistent resource <80004600-80004607>
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver v1.1.21 [Flags: R/O MODULE]

mike@kurobox:>cat /proc/asconf_info
PRODUCTNAME=KURO-BOX/HG(IESHIGE)
VERSION=1.00
SUBVERSION=FLASH 1.0
PRODUCTID=0x00001002
BUILDDATE=2004/10/19 17:18:54
BOOTFLAG=OK

mike@kurobox:>cat /proc/cpuinfo
cpu : 82xx
revision : 16.20 (pvr 8081 1014)
bogomips : 172.85
vendor : Motorola SPS
machine : Sandpoint
processor : PVID: 0x80811014, vendor: Motorola

mike@kurobox:>cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 130138112 122347520 7790592 0 16420864 74362880
Swap: 542859264 1847296 541011968
MemTotal: 127088 kB
MemFree: 7608 kB
MemShared: 0 kB
Buffers: 16036 kB
Cached: 71272 kB
SwapCached: 1348 kB
Active: 69264 kB
Inactive: 35964 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal:       127088 kB
LowFree:          7608 kB
SwapTotal:      530136 kB
SwapFree:       528332 kB

mike@kurobox:>free
             total       used       free     shared    buffers     cached
Mem:        127088     119492       7596          0      16036      71272
-/+ buffers/cache:      32184      94904
Swap:       530136       1804     528332

mike@kurobox:>mount
/dev/hda1 on / type ext3 (rw,noatime,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/hda3 on /mnt type ext3 (rw,noatime)

mike@kurobox:>df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/hda1             10325748    407036   9394192   5% /
/dev/hda3            229516916     32828 217825316   1% /mnt

mike@kurobox:>apt-get moo
         (__)
         (oo)
   /------\/
  / |    ||
 *  /\---/    ~~   ~~
...."Have you mooed today?"...